DELLのRAIDコントローラPERC S100がCentOS(Linux)で使えない件

DELLPowerEdge R210IIにCentOS 5.9をインストールしようとしたところ、RAID1を構成している物理ディスクがそれぞれ sda、 sdb として認識された。RAIDコントローラは標準搭載でオンボードPERC S100である。

グラフィカルインストールでパーティションの確認の画面まで進めたら、組み込みのユーティリティで見た際にVirtual DiskがFailの状態になってしまった。

ググって見ると、PERC S100 は、Linux非対応、Windows でしか使えないようなことが書いてある。

次回購入時は気をつける。オプションでLinux対応のRAIDコントローラを追加するべし。


Dell PowerEdge システム Red Hat Enterprise Linux 5(x86_64, x86)インストール手順および重要情報
ftp://ftp.dell.com/Manuals/all-products/esuprt_electronics/esuprt_software/esuprt_operating_system/red-hat-entps-lx-v5.0_User's%20Guide_ja-jp.pdf

Red Hat Enterprise Linux では PERC S100/S300 RAID コントローラはサポートされていません。詳細については、redhat.com で技術情報 19840 を参照してください。


Do the S100 and S300 Software RAID controllers in my server work with Red Hat Enterprise Linux or Red Hat OpenStack 3.0?
https://access.redhat.com/site/solutions/19852

The S100 and S300 PERC RAID controllers require special drivers and software that can only run under certain Microsoft Windows Operating Systems. These drivers and software are not available for Linux and therefore the devices will not operate in the Red Hat Enterprise Linux or Red Hat OpenStack 3.0 environment.

PERC S100ならびにS300 RAIDコントローラは特別なドライバとソフトウェアを必要としMicrosoft Windowsオペレーティングシステムの下でのみ動作可能です。
これらのドライバとソフトウェアはLinuxで利用可能になっていませんのでこれらの装置は
Red Hat Enterprise Linux または Red Hat OpenStack 3.0 では動作しません。



Dell PowerEdge RAID Controller (PERC) S100 および PERC S300 ユーザーズガイド
2011年2月 Rev.A01
ftp://ftp.dell.com/Manuals/all-products/esuprt_ser_stor_net/esuprt_dell_adapters/poweredge-rc-s100_user's%20guide_ja-jp.pdf